Pelham: Project Profile
This 10′-6″ Dia x 16’·7 1 /4″ deep tank serves as a rehabilitation insert for an existing structurÂally unsound andcorroded concrete structure. The insert allowed for “low impact” construcÂtion methods to replace the existing wet well. This fiberglass structure was provided with a licensed Alabama professional engineer stamp for structural and buoyancy calculations. In addition, […]
Birmingham: Project Profile
This project was a rehabilitation insert for an exisiting concrete structure. It was a duplex staÂtion with 8″ stainless steel force main lines. It included an 8″ HOPE Suction line that was conÂnected to a diesel powered emergency pump, and an oversized access hatch with a safety grate. The coordination with engineering was extensive and […]
Brookhaven: Project Profile
This was a 12′ dia. x 28′-6″ Deep Fiberglass lift station package for a residential subdiviÂsions wastewater. This tank featured 6″ duplex discharge, FEA engineering, and over sized hatches. Overall this was a simple standard wetwell that was delivered on time and fit the exact needs of the client
Congers: Project Profile
This project was unique due to it being a custom underground horizontal tank that reÂquired three interior chambers separated by baffle walls. The purpose of these chamÂbers was to help settle the tank and separate grease and solids. In addition, the tank was made with a VE resin to with stand tempatures of up to […]
Conway: Project Profile
This 1 0′ Dia. x 21 ‘-0″ st. wall fiberglass tank was used to replace an existing aluminum sulfate tank for the city of Conway, AR. It included a caged ladder, safety hand rails, and a clear calibrated site tube. This calibrated site tube allowed for an easy visible read of current liquid levels in […]
Hanover: Project Profile
This wetwell serves a food manufacturing facilities wash-down wastewater stream. The inlet wastestream has a pH range between 3-11 and temp at 160 F. Turnkey installation of all pumps pipe, and covers made this a quick and effortless install for this prominent Design / Build client.
Main Island: Project Profile
This wet well serves as a master pump station for the entire Main Island, Ft. Walton Beach, Florida. This station houses a quada-plex (4) pump system. Each KSB pump weighed 4974 lbs., with an individual pump rating of 174 Hp. The station was engiÂneered for a flooded condition to finish grade, with a bottom deflection […]
Mission Hospital: Project Profile
Fire Suppression System This 12′ x 36′ long saddle tank services as an exterior water storage tank for a hospital fire suppression system. Tank features include a 3″ insulated jacket with a series of heat trace heater pads with low tern sensors. Tank dimensions were critical to fit an exÂisting hospital garage location. This tank […]
Fiberglass Wet Well, Limited Warranty
Fiberglass Deadman Anchor Literature
· The preferred anchoring method, shown on the left side, is to add the 12″ granular bedding over the FRP deadmen andutilize the anchor extension.· The alternative anchoring method is to set the FRP deadmen on top of the 12″ bedding, which may affect buoyancy design.Contractor to remove the anchor extensions when using this method.· […]