Fire Water Tank – Project Profile in Colorado
Read more about our Fire Water Tank in this Colorado Project. HERE. Tank Features: Two 8’ x 17,000 Gallon Storage Tanks Single Wall Fire Water Tank Design Flanged Full Bottom Drain w/ Gussets Anti-Vortex Plate w/ 6” Pipe Flex Connectors w/ Fitting Sleeve 24” Access Opening w/ Brenlin Lid 60” Tall Riser Steel Lifting Lugs […]
New Orleans Project Profile
Seminole: Project Profile
This Fiberglass Tank Solutions fire suppression tank services an office building in Seminole, OK. Due to the rural water districts inadequate flow and pressure in the utility water mains to meet fire suppression requirements, a standby fiberglass underground storage tank utilizing a vertical turbine pump in a separate fiberglass pump vault solved this challenging site […]
St. Croix Project Profile
With a New York engineering firm and a Kentucky contractor, FTS worked to find asolution that worked for both parties on this challenging Virgin Island project. Theoriginal design called for a single 50,000 gallon tank. Due to logistics, barge freight,and narrow mountain roads to the job site, a two-tank design was provided toovercome the challenges. […]
Pensacola Project Profile
These Aqueous Film Forming Foam (AFFF) hazardous liquid collection tanks serve a military hanger location in Milton, Florida. The two tanks share volume with a common side pipe, are (DW) Double Wall, with 30” manways, sumps, and misc. threaded fittings. Each tank is fitted with interstitial monitoring sensors for assured reliability. For anti-flotation, an engineered […]
Portales: Project Profile
This wet well was unique in the use of WEMCO pumps with pre-rotational bases. This station utilized a set of duplex pumps for redundancy, with a third pump for an over-ride pump. Due to the size of the pre-rotational basins and the weight of the base elbows, this was an exceptionally challenging custom built wet […]
Water Silo: Project Profile
This vertical auger dig method utilizes a Fiberglass Tank Solutions underground storage tank for a stormwater storage & reuse application. This construction project utilized a large diameter auger dig technique and a light weight, water tight, corrosive resistant fiberglass tank to complete the installation of this 12′ x 20′ deep tank in ONE DAY! This […]
Pelham: Project Profile
This 10′-6″ Dia x 16’·7 1 /4″ deep tank serves as a rehabilitation insert for an existing structurally unsound andcorroded concrete structure. The insert allowed for “low impact” construction methods to replace the existing wet well. This fiberglass structure was provided with a licensed Alabama professional engineer stamp for structural and buoyancy calculations. In addition, […]
Wisconsin Bottling Facility: Project Resource
This wastewater treatment process system begins with an 8′ dia. X 20′ deep FRP wet well, for high pH wastewater from a bottling facility. The waste is then pulled from the wet well via a pair of fiberglass body pumps in an FRP adjoining 8′ dia. X 20′ deep Fiberglass Dry Pit. The waste stream […]
Birmingham: Project Profile
This project was a rehabilitation insert for an exisiting concrete structure. It was a duplex station with 8″ stainless steel force main lines. It included an 8″ HOPE Suction line that was connected to a diesel powered emergency pump, and an oversized access hatch with a safety grate. The coordination with engineering was extensive and […]